| |
|
|
|
|
| |
|
TECHNICAL ANALYSIS
Test Method: US Code of Federal Regulations Part 1500.44, Title 16
Flammability test on rigid and pliable solids: Pass
Sample Burning Rate (inch/sec.)
Polyester Resin Based Metalized Panel 0.004 |
*A sample is considered to have passed the test if the burning rate is not more then 0.10 inch per second.Test Method: As specified in AOAC 16th Ed. Section 973.32 & 973.82Polyester resin-based metalized panel / bowl Lead & Cadmium content in earthenware quantilation by AAS: PASS
| SGS Laboratory No.
|
Extract, Volume (||)
|
Lead, ppm (mg/L)
|
Cadmium, ppm (mg/L)
|
| 14324 |
2.0 |
<1.0 |
<0.25 |
| 14324 |
2.0 |
<1.0 |
<0.25 |
| 14324 |
2.0 |
<1.0 |
<0.25 |
| 14324 |
2.0 |
<1.0 |
<0.25 |
| 14324 |
2.0 |
<1.0 |
<0.25 |
| 14324 |
2.0 |
<1.0 |
<0.25 |
| Limit for FDA (any one of six) |
|
1.0 ppm |
0.25 |
| Notes: |
1. < = less then
2. mg / L = milligrams per litter
3. ppm = parts per million |
| AAS= ATOMIC ABSORPTION SOECTROPHOMETER |
Conclusion: The client submitted samples described above comply with the leachable lead and cadmium requirements of the American Food and Drug Administration (FDA).
Test Method: Nitric Acid digestion and analyzed by Atomic Absorption Spectrophotometer
Test Sample: 04249 stone/Slate on Resin 12×12 tile size 6 x 12
To determine the soluble Heave Metal contents in accordance with the European StandardEN 71 part 3.1994+ |
| |
|
A1:2000 - Migration of certain elements
|
| Migration of Certain Element |
04249 |
Limit |
| Soluble Lead (pb), mg/kg |
12.7 |
90mg/kg |
| Soluble Antimony (sb), mg/kg |
<5 |
60mg/kg |
| Soluble Arsenic (As), mg/kg |
0.2 |
25mg/kg |
| Soluble Barium (Ba), mg/kg |
<0.5 |
1000mg/kg |
| Soluble cadmium (Cd), mg/kg |
<0.5 |
75mg/kg |
| Soluble Chromium (Cr), mg/kg |
7.5 |
60mg/kg |
| Soluble Mercury (Hg), mg/kg |
<0.5 |
60mg/kg |
| Soluble Selenium (Se), mg/kg |
<0.5 |
500mg/kg |
Methodology: with reference to EN 71 Part 3.1994 + A1:2000 by inductively coupled argon
plasma (ICP-OES)Analysis 04249
Lead (Pb), ppm ND (None detected) detection limit for Pb is 5.0 ppm |
|
DATA SHEET FOR THIN SLATE STONE VENEER |
SR No. |
MATERIAL |
QUANTITY
Kg/Sq. Mtr. |
| 1. |
Processing Material |
1.300 |
| 2. |
Backing Material |
0.150 |
| 3. |
Natural Stone |
1.100 |
|
TOTAL WEIGHT PER SQ. MTR |
1.500-1.600 |
|
|
|
|
THICKNESS OF MATERIAL |
|
|
PARTICULARS |
IN MM |
| 4. |
Thickness of Natural Stone Layers |
0.40mm |
| 5. |
Thickness of Other Chemicals backing |
0.80mm |
| 6. |
Total Thickness of thin Slate Stone Veneer Sheet |
1.20mm - 1.50mm |
|
|
|
|
TEST CONDUCTED AT TESTING LABORATORY IN INDIA WHICH IS ISO 9001:2000 APPROVED INTERNATIONALLY |
TEST VALUE |
PROTOCOL |
| Slate |
Mica |
| 7. |
Water absorption, % by wt. (Test carried out on Thin Slate Stone specimen) |
2.50 |
1.9 |
MASTM C-121 gidelines |
| 8. |
Water absorption, % by wt. (Test carried out on Thin Slate specimen pasted on marble piece) |
0.17 |
0.12 |
MASTM C-97 gidelines |
| 9. |
Absorption test
--- Average wear, mm
--- Max wear on individual specimen,
mm |
0.7
0.8 |
0.9
1.0 |
IS:9162-1979 gidelines |
| 10. |
Density (Mass per unit area, Kg/M2) |
1.45 |
1.66 |
IS:12866-1989 gidelines |
|
|
|
|
